英國GRIMM格林進口熱水循環泵 UK GRIMM Imported hot water circulating pump

英國GRIMM格林進口熱水循環泵概述： 
??  進口熱水循環泵系系臥式單級單吸蝸殼式離心泵，是英國格林引進國際先進技術，在國內du家生產制造的具有世界先進水平的產品，泵的性能參數、結構、安裝尺寸、主要零件材料和泵的技術要求等全部符合英國的技術要求和標準。
          進口熱水循環泵主要用于冶金、電站、輕紡、化工、采暖及余熱利用系統中的管路或封閉回路中的熱水循環或有機熱交換介質的輸送。對輸送熱交換介質的泵來說，介質與泵是處在高溫下，而系統壓力是不高的。

英國GRIMM格林進口熱水循環泵結構說明：
          GRS型泵為臥式徑向剖分，后開門，單級單吸蝸殼式離心泵。泵的連接尺寸按照ISO2858/DIN 24256，腳支撐式。
          GRSY、GRY為臥式，徑向剖分，后開門，單級單吸蝸殼式離心泵。泵連接尺寸按照ISO2858/DIN 24256，中心線支撐式。

英國GRIMM格林進口熱水循環泵性能特點：
1、軸封：可選配軟填料密封和機械密封。  
2、聯軸器：采用彈性柱梢聯軸器，傳動精度高。  
3、輔助管路：按API 610第8版要求配置。  
4、承壓：設計壓力為4.0MPa，承壓高。  
5、軸承：軸承選用圓柱滾子軸承與兩個角接觸軸承配套，采用稀油潤滑，承載能力顯著提高。軸承設計壽命25000小時。  
6、高效節能：采用CFD計算流體動力學，分析計算出泵內壓力分布和速度分布關系、優化泵的流道設計，確保泵有高效的水力形線，提高了泵的效率。  
7、耐高溫結構：泵體采用中心支撐方式，解決了泵在輸送高溫介質時防止高溫下泵組熱膨脹不一致而造成的應力集中以及聯軸器對中心發生改變。泵支架、泵蓋、懸架體(軸承部位)及機封壓蓋均有冷卻腔，可在不同溫度時分別用冷卻水冷卻或風冷卻。

英國GRIMM格林進口熱水循環泵技術參數： 
流量：3.8～1580m3/h
揚程：3～250m
口徑：32～300mm
轉速：1450～2900r/min
功率：2.2～450kw
介質溫度：≤280℃
工作壓力：≤4.0MPa

英國GRIMM格林進口熱水循環泵適用范圍： 
          適用于冶金、電站、輕紡、化工、采暖及余熱利用系統中的管路或封閉回路中的熱水循環。輸送280℃以下，不含顆粒的高溫水。

UK GRIMM Imported hot water circulating pump summary:

        Import Department of hot water circulating pump single stage single suction horizontal centrifugal pump is the British Green introduction of international advanced technology, in the exclusive domestic production of the world's advanced level products, performance parameters, pump structure, installation size, material of main parts and pump technical requirements are in conformity with the technical requirements of Britain and standard.

         Imported hot water circulating pump is mainly used in metallurgy, power plant, textile, chemical, heating and waste heat utilization system in the pipeline or closed loop hot water circulation or organic heat exchange medium transmission. To transport heat exchange medium pump, medium and pump is in high temperature, but system pressure is not high.

UK GRIMM Imported hot water circulating pump structure description:

       GRS pump is horizontal radial split, back door, single stage single suction volute centrifugal pump. Pump connection size according to ISO 2858 / DIN 24256, foot support type.

         GRSY and GRY are horizontal, radial split, back door, single stage single suction volute centrifugal pumps. Pump connection size according to ISO 2858 / DIN 24256, central line support type.

UK GRIMM Imported hot water circulating pump performance characteristics:

1.Shaft seal: optional with soft packing, sealing and mechanical seal.

2.Coupling: the use of elastic column pin coupling, high transmission accuracy.

3.Auxiliary pipe: according to API 610, Eighth Edition requirements configuration.

4.Pressure: design pressure of 4.0MPa, high pressure.

5.Bearings: Bearings selected cylindrical roller bearings and two angular contact bearings matching, the use of thin oil lubrication, bearing capacity improved significantly. Bearing design life 25000 hours.

6.High efficiency and energy saving: use CFD computational fluid dynamics to analyze and calculate the pressure distribution and velocity distribution in the pump, optimize the flow passage design of the pump, ensure the efficient hydraulic line of the pump, and improve the efficiency of the pump.

7.High temperature structure: pump body using the center support way, solve the pump in the transmission of high temperature medium, prevent high temperature under the pump group thermal expansion inconsistent stress concentration, and the coupling to the center change. Pump support, pump cover, suspension body (bearing parts) and machine seal gland have cooling chamber, can be used at different temperatures with cooling water cooling or wind cooling.

UK GRIMM Imported hot water circulating pump technical Parameters:

Flow rate: 3.8 ~ 1580m3/h

Lift: 3 ~ 250m

Caliber: 32 ~ 300mm

Speed: 1450 ~ 2900r/min

Power: 2.2 ~ 450KW

Medium temperature: less than or equal to 280 DEG C

Working pressure: 4.0MPa

UK GRIMM Imported hot water circulating pump scope of application:

        The utility model is suitable for hot water circulation in pipelines or closed circuits in metallurgy, power plants, light textile, chemical industry, heating and waste heat utilization systems. Deliver high temperature water without particles at 280 degrees centigrade.